Danh mục sản phẩm


(Đang cập nhật ...)
Hết hàng
* Giá sản phẩm chưa bao gồm VAT
Stereo Amplifier, 2 x 525 watts @ 4 ohms / 300 watts @ 8 ohms
Được phân phối bởi Minh Nhật Audio hàng chính hãng
Liên hệ: 0915962678

Bộ đẩy công suất CROWN XLS1500

The XLS 1500 is a 525W @ 4 Ohms 2-channel power amplifier. Crown's XLS Series amplifiers define the standard for portable PA systems with unmatched performance, technology and affordability. Its advantageous flexibility includes multiple inputs so you can plug in anything and play anywhere, along with several system setup configurations. The integrated crossovers and switch-mode power supply produce superior sound, and Peakx™ limiters protect your speakers. Weighing less than 12 pounds, compared to 40 pounds for its competitors, it's much easier to set up and move from show to show. Simply put, the XLS is most reliable, versatile, efficient amp available today.


  • XLS High Performance, Lightweight Class D amp weighs less than 11 lbs.
  • Integrated PureBand™ Crossover System for better performance and control
  • Peakx™ Limiters provide maximum output while protecting your speakers
  • XLR, 1/4", RCA inputs provide outstanding flexibility
  • Efficient forced-air fans prevent excessive thermal buildup
  • Electronically balanced XLR inputs; touch  proof binding post and Speakon®  outputs
  • Precision detented level controls, power switch, power LED, and six LEDswhich indicate signal, clip and fault for each channel
  • Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

  • Total Harmonic Distortion (THD): < 0.5%
  • Intermodulation Distortion (IMD): (60Hz and 7kHz at 4:1)
  • From fullrated output to -30dB: <0.3%
  • Damping Factor (8 ohm): 10 Hz to 400 Hz: > 200
  • Crosstalk (below rated 8O power):
  • At 1kHz: > 85dB
  • At 20kHz:>55dB
  • Input Impedance (nominal): 20 kO balanced, 10 kO unbalanced
  • Load Impedance:
  • 2 to 8 ohms per channel in Stereo
  • 4 to 8 ohms inBridge Mono
  • AC Line Voltage and Frequency Configurations Available (± 10%):
  • 120 VAC60 Hz
  • 100 VAC 50/60 Hz
  • 220 and 240 VAC 50 Hz
  • Ventilation: Flow-through ventilation from front to back
  • Cooling: Internal heat sinks with forced-air cooling for rapid, uniformheat dissipation
  • Air Volume Requirements (per minute per unit): 80.15 ft³ (2.27 m³)
  • Integrated Processing:
  • PureBand™ Crossover System
  • Crossover Filter:Linkwitz-Riley 24dB per Octave
  • Crossover Frequency Range: 50 HZ - 3kHz
  • Crossover Mode: Crossover (CH1=LPF, CH2=HPF), LowPass (both channelsLPF), HighPass (both channels HPF), Bridge (LPF or HPF).
  • Peakx™ limiters:Channel independent clip limiter designed to provide maximum output whileprotecting your loudspeakers
  • Input/Output:
  • Input Connectors: XLR (one per channel), 1/4-Inch (oneper channel), and RCA (one per channel). 1/4-Inch connectors can be used asloop-thrus to distribute signal to additional amplifiers.
  • OutputConnectors: Two 4-Pole Speakon® Output Connectors accept 2-pole or 4-poleSpeakon® connectors. The top Speakon connector is wired for both channels soit can be used for bridgemono wiring or
  • for stereo wiring of two speakers to asingle Speakon connector.
  • One pair of back-panel binding posts per channel;accepts banana plugs or bare wire. (European models do not accept bananaplugs.)
  • Construction: 8.12" depth
  • Dimensions (H x W x D): 3.5" x 19" x 7.7"
  • Weight (Net, Shipping): 8.6 lbs, 13.6 lbs